BMW R1150RT - MAINTENANCE INTEGRAL ABS Wartungshandbuch PDF herunterladen (Seite 40)

00.35

13 72 000 Replacing intake air filter

element

(Inspection III)

in very dirty and dusty operating conditions,

replace every 10,000 km (6,000 miles) or even

more frequently if necessary

•

Open clips securing air filter cover.

•

Replace air filter element.

•

Close air filter cover.

12 31 240

Replacing Poly-V belt

(Inspection III)

every 60,000 km (36,000 miles)

•

Remove left side fairing panel.

•

Remove front intake pipe.

•

Disengage fairing bracket from end cover on left.

•

Remove front cover.

•

Slacken alternator securing screws (1,3,4).

•

Remove old Poly-V belt.

L Note:

Loop Poly-V belt over crankshaft belt pulley first,

then over alternator belt pulley.

•

Install new Poly-V belt.

Poly-V belt adjusting procedure:

•

Place the Poly-V belt in position, tension it and

turn the engine over once, then relieve belt ten-

sion.

Poly-V belt tensioning procedure:

1 Slightly tighten hex nut (1) on adjusting screw (2)

by hand (do not use tools).

2 Tighten adjusting screw (2) with a torque wrench

and keep preload applied.

3 Tighten upper retaining nut (3), then remove

torque wrench from adjusting screw.

4 Tighten all screws and nuts.

X Tightening torque:

Preload for Poly-V belt ................................... 8 Nm

Belt pulley to alternator ................................ 50 Nm

Belt pulley to crankshaft............................... 50 Nm

Alternator to alternator support cover........... 20 Nm

R22000130

R22110010

RS110480

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 95 96

Kommentare zu diesen Handbüchern

Keine Kommentare

BMW R1150RT - MAINTENANCE INTEGRAL ABS Wartungshandbuch Seite 40

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Motorräder BMW R1150RT - MAINTENANCE INTEGRAL ABS