BMW R1150RT - MAINTENANCE INTEGRAL ABS Wartungshandbuch PDF herunterladen (Seite 42)

00.37

Checking brake pads and discs for

wear/replacing

(Inspections II and III)

Checking brake pads for wear

Brake pads, front brake

•

Visually inspect the brake pads.

– Wear indicators (1) must be clearly visible.

•

If necessary, check/measure thickness of brake

pads.

e Attention:

Do not permit brake pad thickness to fall below the min-

imum value. Always replace the brake pads as a

complete set.

Minimum pad thickness: ......... 1.0 mm (0.0393 in)

•

Check that colour codes of brake pads and

brake calipers (2) match.

Colour code: ................................................. white

Brake pads, rear brake

•

Visually inspect the brake pads.

– Make sure that the brake disc is not visible

through the bore (arrow) in the inner brake pad.

•

If necessary, check/measure thickness of brake

pads.

e Attention:

Do not permit brake pad thickness to fall below the min-

imum value. Always replace the brake pads as a com-

plete set.

Minimum pad thickness: ........ 1.0 mm (0.0393 in)

– If the brake disc is visible through the bore in the

wheel-side brake pad, the brake lining is worn to

its minimum permissible thickness.

R22000160

R22000170

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 95 96

Keine Kommentare

BMW R1150RT - MAINTENANCE INTEGRAL ABS Wartungshandbuch Seite 42