BMW R1150RT - MAINTENANCE INTEGRAL ABS Wartungshandbuch PDF herunterladen (Seite 56)

00.51

•

Correct the brake fluid level.

•

Wipe the rim of the reservoir, the rubber dia-

phragm and the cover to remove brake fluid, and

carefully reassemble the components.

– Place the motorcycle on its centre stand.

Required level

not below ......................................................... MIN

e Attention:

After all the work on the brake system has been

completed, run a bleed test using the

BMW MoDiTeC.

•

Perform bleed test with BMW MoDiTeC.

(

a 00.29)

•

Install fuel tank.

Brake fluid....................................................DOT 4

Checking clutch operating fluid

level

(Inspections II and III)

e Attention:

Keep the brake fluid in the clutch operating system

away from painted surfaces on the motorcycle be-

cause brake fluid attacks paint.

•

Place motorcycle on its centre stand.

•

Move the handlebars to the straight-ahead

position.

Required level with a new clutch liner:

...........................................Half way up sight glass

L Note:

As the clutch lining wears, the fluid level in the res-

ervoir rises.

•

If necessary, remove reservoir cap with insert.

•

Correct the fluid level.

– Mark in reservoir: same as brake circuit.

•

Reinstall the reservoir cap with insert.

•

Tighten the reservoir cap carefully and without

using force.

Brake fluid ...................................................DOT 4

R22000150

R22000190

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 95 96

Kommentare zu diesen Handbüchern

Keine Kommentare

BMW R1150RT - MAINTENANCE INTEGRAL ABS Wartungshandbuch Seite 56

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Motorräder BMW R1150RT - MAINTENANCE INTEGRAL ABS