BMW HP2 Wartungshandbuch PDF herunterladen (Seite 75)

load-dependent adjust-

ment of spring preload

33 mm (Negative spring dis-

placement of front wheel

under load)

If you want to reduce the dif-

ference (increase spring pre-

load, in other words), turn ad-

justing ring 2 in direction c.

If you want to increase the dif-

ference (reduce spring preload,

in other words), turn adjusting

ring 2 in direction b.

Tighten the lock by tightening

adjusting ring 1 in direction c

with the tool from the toolkit,

while holding adjusting ring 2

with the second tool from the

toolkit.

Locknut for spring basic

setting to spring retainer

5Nm

Adjust the damping character-

istic to suit spring preload.

Hold the air intake pipe in posi-

tion.

Push in both retainers 2 until

they engage with an audible

click.

Check that the throttle-valve

cable is seated in guide 3 of

the intake and that the throttle

valve is seated against the

stop.

Operation

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 186 187

Keine Kommentare

BMW HP2 Wartungshandbuch Seite 75