BMW HP2 Wartungshandbuch PDF herunterladen (Seite 136)

Remove securing screws 1 of

the brake calipers on left and

right.

Force the brake pads slightly

apart by rocking brake

calipers 2 back and forth A

against brake discs 3.

Carefully pull the brake calipers

back and out until clear of the

brake discs.

with BMW Motorrad ABS

Remove screw 1 and remove

the ABS sensor from its bore.

Place the motorcycle on an

auxiliary stand; BMW Motorrad

recommends the BMW Motor-

rad rear-wheel stand.

Install the rear-wheel stand

( 137)

Raise front of motorcycle until

the front wheel can turn freely.

BMW Motorrad recommends

the BMW Motorrad front-wheel

stand for lifting the motorcycle.

Install the front-wheel stand

( 136)

Release axle clamping screw 2.

Remove quick-release axle 3,

while supporting the wheel.

Lower the front wheel to the

ground between the front forks.

Roll the front wheel forward to

remove.

132

Maintenance

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 186 187

Keine Kommentare

BMW HP2 Wartungshandbuch Seite 136