Seat bulb housing 2 in its hold-
ers.
Install screws 1.
Replacing turn indicator
bulbs, front and rear
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Always make sure that the
motorcycle is stable and firmly
supported.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Remove screw 1.
Pull the glass out of the reflect-
or housing at the threaded-
fastener side.
Turn bulb 2 counter-clockwise
and remove it from the bulb
housing.
Replace the defective bulb.
Bulbs for flashing turn
indicators, front
R10W / 12 V / 10 W
with OE White turn indicators:
RY10W / 12 V / 10 W
Bulbs for flashing turn
indicators, rear
R10W / 12 V / 10 W
with OE White turn indicators:
8
123
z
Maintenance
Kommentare zu diesen Handbüchern