the brake lever is pulled or the
brake pedal depressed.
Firmly pull the handbrake lever
several times.
The pressure point must be
clearly perceptible.
with OE BMW Motorrad Integral
ABS:
Switch on the ignition.
Wait for ABS self-diagnosis to
complete.
Firmly pull the handbrake lever
several times.
The pressure point must be
clearly perceptible.
Removing rear wheel
Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
Engage first gear.
Parts of the exhaust system
can be hot.
Do not touch hot parts of the
exhaust system.
Place a support underneath
the rear wheel and remove
studs 1.
Roll the rear wheel out toward
the rear.
Installing rear wheel
Roll the rear wheel into position
at the rear-wheel adapter.
Seat the rear wheel on the
rear-wheel adapter.
The wheel studs for the
cross-spoked wheel (op-
tional extra) and the cast alumini-
um wheel differ in length. Mix-
ing up sets of studs or using the
wrong studs would mean that the
rear wheel would not be correctly
secured and this, in turn, could
result in an accident.
Use only wheel studs with the
same, approved length code. Do
not oil or grease wheel studs.
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
8
116
z
Maintenance
Kommentare zu diesen Handbüchern