BMW R1100 Spezifikationen PDF herunterladen (Seite 63)

Front Wheel Installation

reinstall rotors, if you removed them 24 Nm plus Loctite 243

grease axle lightly

roll wheel in

insert right side spacer and left side speedo drive

insert axle from right side

tighten axle nut (bolt) R=17mm RS=18mm 22 ft.lbs.(30 Nm)

gently pry brake pads apart with tire iron

install calipers 8mm - 30 ft.lbs.(40 Nm)

pump front brakes until pressure returns!!!

with bike off centerstand compress front forks several times with rear brake

applied

tighten axle clamp bolts -6mm 16 ft.lbs.(22 Nm)

RS: reinstall front fender

pump front brakes!!!

Rear Wheel Removal

before removing, check rim for dents!!!

block up bike under catalytic box

put bike into first gear

remove both saddle bags

RS: remove rear fender

pull out center wheel cover with hook on shock tool

remove four lug bolts - 17mm, watch for spacer on right side

roll wheel out

(check rear brake pads!!!)

Rear Tire Change

same as front

Rear Tire Balance

same as front

use four hole adapter and lug bolts to balance

Rear Wheel Installation

roll wheel in

install spacer on right side

install four lug bolts, snug with lug wrench

torque to 37 ft.lbs. (50 Nm)- 17mm, then torque to 77 ft.lbs.(105 Nm)

align notch on center wheel cover and install

1 2 ... 58 59 60 61 62 63 64

Keine Kommentare

BMW R1100 Spezifikationen Seite 63