BMW Bluetooth Upgrade Module Bedienungshandbuch PDF herunterladen (Seite 9)

8

Removing the mobile phone

Press eject button.

Setting up the Bluetooth

wireless technology phone to

your vehicle

First steps

A number of procedures need to be performed

on the mobile phone; these vary from model to

model. Before pairing the phone in the vehicle,

familiarise yourself with your mobile phone,

see operating instructions for your mobile

phone, e.g. the sections on:

 Locating Bluetooth wireless technology

device

 Connecting up Bluetooth wireless technol-

ogy device

 Bluetooth connection

 Pairing Bluetooth wireless technology

device

 Locating audio accessories.

In order to pair the mobile phone, you require

the “BLUETOOTH PASSKEY”, a

4-digit number that will generally be supplied

with the vehicle’s owner manual. Please retain

this passkey for future reference.

Pairing

Requirements:

 The mobile phone must be operational

 Ignition key must be in position 0.

1. A: If not equipped with eject box:

Turn key from ignition 0 to ignition 1 or

higher.

1. B: If equipped with optional eject

box:

Press & hold the button above the storage

compartment, then after about 3 seconds,

turn the ignition key to position 1 and

release the button after approximately 3

seconds.

“BLUETOOTH PAIRING” appears on the

display or monitor.

During the pairing process, depending on

equipment the indicator lights on the on-

board computer or on the multi-informa-

tion display flash.

2. Your mobile phone should now be set to

search for Bluetooth wireless technology

enabled devices. This feature may vary

from model to model, see operating

instructions for your mobile phone.

A request to enter a password, PIN or code

appears on the display of your mobile

phone, depending on the model. This is

the “BLUETOOTH PASSKEY” supplied

with the vehicle literature

3. Enter the “BLUETOOTH PASSKEY” using

the numerical keys of your mobile phone,

and confirm the input. Look for a confirma-

tion message on the handset

4. To conclude the pairing process, turn the

ignition key to position 0.

5. Wait approximately 30 seconds before

turning key to ignition 1 or higher. The

phone will now be connected.

The next time you use the mobile phone inside

the car, provided the ignition key is in position

1 or beyond, the phone will be identified nor-

mally within a minute.

As soon as a mobile phone is identified by the

vehicle, depending on your mobile phone the

28423 Bluetooth I_Bus book.qxd 9/28/05 10:40 AM Page 8

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare