BMW Z4 sDrive35i Bedienungshandbuch PDF herunterladen (Seite 211)

Mobility

209

Reference At a glanceControlsDriving tipsCommunications NavigationEntertainment

Xenon lamps

Have any work on the xenon lamp system,

including bulb replacements, performed

only by a BMW center or a workshop that works

according to BMW repair procedures with cor-

respondingly trained personnel. Otherwise, if

such work is carried out improperly, the high

voltage in the system presents the danger of

fatal injuries.<

Parking lamps and roadside parking

lamps, daytime running lamps

H8 bulb, 35 watts

1. Switch off the lamps and take the remote

control out of the ignition lock.

2. Turn the upper access cover to the left and

remove it, see arrow.

3. Turn the bulb by approx. 90°, see arrow 1,

and pull it out, see arrow 2.

4. Disconnect the plug, change the bulb and

reconnect the plug.

5. Insert the bulb and turn it until it stops.

6. Screw on the access cover tightly by turn-

ing it to the right.

Be careful when attaching the access

cover; otherwise it may leak, causing

damage to the headlamp system.<

Turn signals, front

P24W bulb, 24 watt

1. Turn the wheel outwards.

2. Turn both locks in the wheel house to the

left and remove the cover.

3. Turn the bulb holder to the left and

remove it.

4. Turn the bulb to the right, see arrow, and

remove it.

5. Change the bulb and screw it into the bulb

holder toward the left.

6. Insert the bulb holder and turn it to the right.

7. Reattach the cover.

1 2 ... 206 207 208 209 210 211 212 213 214 215 216 ... 247 248

Keine Kommentare

BMW Z4 sDrive35i Bedienungshandbuch Seite 211