BMW Z4 sDrive28i Bedienungshandbuch PDF herunterladen (Seite 53)

8-gear Sport automatic

transmission

Transmission positions

D Drive, automatic position

Position for normal vehicle operation. All for‐

ward gears are available.

Under normal operating conditions, fuel con‐

sumption is lowest when you are driving in po‐

sition D.

Kickdown

Kickdown is used to achieve maximum driving

performance. Press on the accelerator beyond

the resistance point at the full throttle position.

R is Reverse

Select only when the vehicle is stationary.

N is Neutral

The vehicle can roll.

N remains engaged after the engine is switched

off if the remote control remains in the ignition

lock. This function can be used in an automatic

car wash, refer to page 182, for example. P is

automatically engaged after approx. 30 minutes.

P Park

The rear wheels are locked.

P is engaged automatically when the following

conditions are met:

▷ The driver's door is opened while the engine

is running, the safety belt is not fastened and

neither the brake pedal nor the accelerator

is activated.

▷ The engine is switched off unless N is en‐

gaged and the remote control is in the igni‐

tion lock.

▷ The remote control is removed from the ig‐

nition lock, refer to page 45.

Before leaving the vehicle, ensure that the trans‐

mission position P is engaged; otherwise, the

vehicle may begin to roll.

Engaging transmission position

▷ Transmission position P can only be disen‐

gaged if the engine is running and the brake

pedal is pressed.

▷ With the vehicle stationary, press on the

brake pedal before shifting out of P or N;

otherwise, the shift command will not be

executed: shift lock.

Press on the brake pedal until you start

driving

To prevent the vehicle from creeping after you

select a driving position, maintain pressure on

the brake pedal until you are ready to start.◀

Engaging transmission positions D, R,

Briefly push the selector lever in the desired di‐

rection, beyond a resistance point if necessary.

When shifting out of P or into R, simultaneously

push the unlock button 1.

The engaged transmission position is displayed

on the selector lever.

After releasing the selector lever, it returns to its

center position.

Engaging transmission position P

Select only when the vehicle is stationary.

Seite 53

Driving Controls

Online Edition for Part no. 01 40 2 609 184 - 09 11 500

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 219 220

Kommentare zu diesen Handbüchern

Keine Kommentare

BMW Z4 sDrive28i Bedienungshandbuch Seite 53

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos BMW Z4 sDrive28i