BMW Z4 sDrive28i Bedienungshandbuch PDF herunterladen (Seite 171)

Use a clean tissue, cloth or something similar, or

hold the bulb by its base.◀

Light-emitting diodes LED

Light-emitting diodes installed behind translu‐

cent lenses serve as the light source for many of

the controls and displays in your vehicle.

These light-emitting diodes, which operate us‐

ing a concept similar to that applied in conven‐

tional lasers, are officially designated as Class 1

light-emitting diodes.

Do not remove the covers

Do not remove the covers, and never stare

into the unfiltered light for several hours; other‐

wise, irritation of the retina could result.◀

Headlamp glass

Condensation can form on the inside of the ex‐

ternal lamps in cool or humid weather. When you

drive with the lights switched on, the conden‐

sation evaporates after a short time. The head‐

lamp glasses do not need to be changed.

If the condensation in the headlamps does not

evaporate after trips with the lights switched on,

and the amount of moisture in the headlamps

increases, for example if water droplets form,

have them checked by your service center.

Xenon headlamps

Because of the long life of these bulbs, the like‐

lihood of failure is very low. Switching the lamps

on and off frequently shortens their life.

Do not perform work/bulb replacement on

xenon headlamps

Have any work on the xenon lighting system, in‐

cluding bulb replacement, performed only by a

service center.

Due to the high voltage present in the system,

there is the danger of fatal injuries if work is car‐

ried out improperly.◀

Parking lamps, roadside parking lamps,

daytime running lights

H8 bulb, 35 watt

1. Switch off the lamps and take the remote

control out of the ignition lock.

2. Turn the upper access cover to the left and

remove it, see arrow.

3. Turn the bulb by approx. 90°, see arrow 1,

and pull it out, see arrow 2.

4. Disconnect the plug, change the bulb and

reconnect the plug.

5. Insert the bulb and turn it until it stops.

6. Screw on the access cover tightly by turning

it to the right.

Attach the access cover carefully

Be careful when attaching the access

cover; otherwise, it may leak, causing damage to

the headlamp system.◀

Seite 171

Replacing components Mobility

171

Online Edition for Part no. 01 40 2 609 184 - 09 11 500

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 219 220

Kommentare zu diesen Handbüchern

Keine Kommentare

BMW Z4 sDrive28i Bedienungshandbuch Seite 171

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos BMW Z4 sDrive28i