LUX H8 V3BMW 128i Installation GuideNote: Perform this installation at your own risk.Tools Required:• 10mm socket wrenchInstallation:• Open the hood•
• Pull the plastic cover up and out. There are two feet at the bottom of the cover that require the cover to be pulled up before pulling the cover of
• Once you have the back cover off, remove the halogen bulb by turning it counter-clockwise. It is the one with the yellow
• Insert the new LUX H8 into the headlight, reversing the steps to remove the old bulb. You will need to twist it clockwise until it locks into plac
• A simple way to make sure that the LUX H8 bulb is lined up properly is to look through the front headlight from the front of the car rather than fro
• Next, separate the air cleaner box from the flexible hose by gently pulling the back the flexible hose from the air cleaner box tabs.• You will now
• Disconnect the halogen bulb by turning it counter-clockwise. • Separate the halogen bulb where it joins to the wire harness.• Connect the LUX H8 bu
• The back headlight cover should just slide down into place. DO NOT FORCE IT INTO PLACE. Once the back cover is horizontal, be sure that the two fee
Kommentare zu diesen Handbüchern