BMW Z4 3.0i Bedienungshandbuch PDF herunterladen (Seite 91)

Reference At a glanceControlsDriving tipsMobility

89

1. Open the caps with a suitable object,

e.g. a coin or screwdriver

2. Fold up the protective cover in the

wheel well.

Headlamp cover

1. Pull the wire clamp out straight

2. Pull the wire clamp past the catches,

see arrows, and fold it down

3. Flip the headlamp cover open and

remove.

Reinstall the headlamp cover care-

fully. If it is not on tight, the headlamp

installation could be damaged.<

Reinstall the headlamp cover in reverse

order.

Low beams and high beams

Left side of engine compartment:

1 Low beams

2 High beams

H7 bulb, 55 watts

The H7 bulb is pressurized. There-

fore, wear safety glasses and protec-

tive gloves. Failure to comply with these

precautions could result in physical injury if

the bulb is damaged.<

1. Turn the bulb holder to the left and pull

out

2. Remove and replace the bulb

3. Install in the reverse order.

When cleaning the headlamps,

please observe the instructions in the

Caring for your vehicle brochure.<

Xenon lamps*

The service life of these bulbs is very long

and the probability of a failure is very low,

provided that they are not switched on and

off an unusual number of times. If one of

these bulbs should nevertheless fail, it is

possible to continue driving with great cau-

tion using the fog lamps, provided traffic

laws in your area do not prohibit this.

Because of the extremely high volt-

ages involved, any work on the xenon

lighting system, including bulb-changing,

should be carried out by technically quali-

fied personnel only. Otherwise, there is a

risk of fatal injury.<

Online Version for Part No. 01 41 0 157 498 - © 10/03 BMW AG

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 119 120

Kommentare zu diesen Handbüchern

Keine Kommentare