BMW SERIE 3 Bedienungshandbuch PDF herunterladen (Seite 286)

5. Remove the connecting line from the clip on

the bulb holder.

6. Release the catch at the top on the connec‐

tor of the connecting line and remove the

connector from the bulb holder.

Replacing the bulbs

1. Loosen the four fasteners, arrow 1, on the

bulb holder and remove the bulb holder from

the tail lamp, arrow 2.

2. Press the defective bulb gently into the

socket, turn counterclockwise and remove.

3. Proceed in the reverse order to insert the

new bulb and attach the bulb holder. Make

sure that the bulb holder engages in all fas‐

teners.

Installing the tail lamp

Connect the connecting line to the tail lamp

and secure the bulb holder in the clip.

2. Make sure that the sealing ring is on the

centering pin, arrow 2, and is not damaged.

3. Position and firmly press the outer part of

the tail lamp onto the rubber mount, arrow 1

and the inner part onto the centering com‐

ponent, arrow 2. Make sure that the tail lamp

engages in the rubber mount.

4. Screw the two nuts onto the tail lamp and

mount the cover.

Lamps in the trunk lid

General information

Follow the General instructions on lamps and

bulbs, refer to page 279.

Reversing lamps: 21-watt bulb, P21W

Inner brake lamps: 21-watt bulb, H21W

Accessing the lamps

Use the screwdriver from the onboard vehi‐

cle tool kit to loosen and completely remove

the six screws on the trim.

2. Carefully loosen the trim from the trunk lid,

starting at the edge and working toward the

area around the recessed grips. Make sure

that the trim does not become stuck.

3. Carefully swing out the trim.

Seite 286

Mobility Replacing components

286

Online Edition for Part no. 01 40 2 608 633 - 11 09 490

1 2 ... 281 282 283 284 285 286 287 288 289 290 291 ... 324 325

Kommentare zu diesen Handbüchern

Keine Kommentare

BMW SERIE 3 Bedienungshandbuch Seite 286

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos BMW SERIE 3