BMW SERIE 3 Bedienungshandbuch PDF herunterladen (Seite 285)

Tail lamps, bulb replacement

At a glance

1 Turn signal

2 Reversing lamp

3 Inside brake lamp

4 Tail lamps

5 Outside brake lamp

Bulb replacement, exterior tail lamps

General information

Follow the General instructions on lamps and

bulbs, refer to page 279.

Turn signal: 21-watt bulb, P21W

Exterior brake lamp: 21-watt bulb, P21W

The tail lamps feature LED technology. Contact

your service center in the event of a malfunction.

Use caution when replacing the bulb

Use caution and proceed one step at a

time when replacing the bulbs to prevent dam‐

age to the tail lamps or vehicle.◀

Removing the exterior tail lamp

1. Open trunk lid.

2. Use the screwdriver from the onboard vehi‐

cle tool kit to loosen the screw, arrow 1, and

remove the cover, arrow 2.

3. Use the screwdriver handle to loosen the

two nuts, arrows 1 and 2, and remove. The

tail lamp is still attached to a rubber mount

on the outside.

4. Grasp the inner edge of the tail lamp and

carefully swing it back and out of the rubber

mount, arrow 1. Use your free hand to hold

it in place in order to prevent the tail lamp

from coming loose suddenly. Make sure that

the foam rubber sealing ring is on the cen‐

tering pin, arrow 2.

Seite 285

Replacing components Mobility

285

Online Edition for Part no. 01 40 2 608 633 - 11 09 490

1 2 ... 280 281 282 283 284 285 286 287 288 289 290 ... 324 325

Keine Kommentare

BMW SERIE 3 Bedienungshandbuch Seite 285