BMW SERIE 3 Bedienungshandbuch PDF herunterladen (Seite 280)

Working on the lighting system

When working on the lighting system, you

should always switch off the lights affected to

prevent short circuits.

To avoid possible injury or equipment damage

when replacing bulbs, observe any instructions

provided by the bulb manufacturer.◀

Do not perform work/bulb replacement on

xenon headlamps

Have any work on the xenon lighting system, in‐

cluding bulb replacement, performed only by a

service center. Due to the high voltage present

in the system, there is the danger of fatal injuries

if work is carried out improperly.◀

Do not touch the bulbs

Do not touch the glass of new bulbs with

your bare hands, as even minute amounts of

contamination will burn into the bulb's surface

and reduce its service life.

Use a clean tissue, cloth or something similar, or

hold the bulb by its base.◀

Light-emitting diodes (LEDs)

Light-emitting diodes installed behind a cover

serve as the light source for controls, display el‐

ements and other equipment.

These light-emitting diodes, which are related

to conventional lasers, are officially designated

as Class 1 light-emitting diodes.

Do not remove the covers

Do not remove the covers, and never stare

into the unfiltered light for several hours; other‐

wise, irritation of the retina could result.◀

Headlamp glass

Condensation can form on the inside of the ex‐

ternal lamps in cool or humid weather. When

driving with the light switched on, the conden‐

sation evaporates after a short time. The head‐

lamp glasses do not need to be changed.

If the headlamps do not dim despite driving with

the light switched on, increasing humidity forms,

e. g. water droplets in the light, have the service

center check this.

Front lamps, bulb replacement

Halogen headlamps

1 Parking lamps

2 High beams/headlamp flasher

3 Low beams

4 Turn signal

5 Daytime running lights

Accessing the turn signals and low beams

Follow the General instructions on lamps and

bulbs, refer to page 279.

In the wheel house, loosen the two brackets

and remove the cover.

Seite 280

Mobility Replacing components

280

Online Edition for Part no. 01 40 2 608 633 - 11 09 490

1 2 ... 275 276 277 278 279 280 281 282 283 284 285 ... 324 325

Kommentare zu diesen Handbüchern

Keine Kommentare

BMW SERIE 3 Bedienungshandbuch Seite 280

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos BMW SERIE 3