BMW SERIE 3 Bedienungshandbuch PDF herunterladen (Seite 276)

Coolant

Vehicle equipment

All standard, country-specific and optional

equipment that is offered in the model series is

described in this chapter. Therefore, equipment

is also described that is not available in a vehicle,

e. g., because of the selected optional equip‐

ment or country variant. This also applies for

safety-related functions and systems.

General information

Danger of burns from hot engine

Do not open the cooling system while the

engine is hot; otherwise, escaping coolant may

cause burns.◀

Suitable additives

Only use suitable additives; otherwise, en‐

gine damage may occur. The additives are

harmful to your health.◀

Coolant consists of water and additives.

Not all commercially available additives are suit‐

able for your vehicle. Ask your service center for

suitable additives.

Coolant level

Checking

Let the engine cool.

2. The coolant level is correct if it lies between

the minimum and maximum marks. The

marks are on the side of the coolant reser‐

voir.

Adding engine oil

1. Let the engine cool.

2. Turn the cap of the coolant reservoir slightly

counterclockwise to allow any excess pres‐

sure to dissipate, and then open it.

3. If the coolant is low, slowly add coolant up to

the specified level; do not overfill.

4. Turn the cap until there is an audible click.

5. Have the cause of the coolant loss elimi‐

nated as soon as possible.

Disposal

Comply with the relevant environmental

protection regulations when disposing

of coolant and coolant additives.

Seite 276

Mobility Coolant

276

Online Edition for Part no. 01 40 2 608 633 - 11 09 490

1 2 ... 271 272 273 274 275 276 277 278 279 280 281 ... 324 325

Kommentare zu diesen Handbüchern

Keine Kommentare

BMW SERIE 3 Bedienungshandbuch Seite 276

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos BMW SERIE 3