BMW E36 Convertible Betriebsanleitung PDF herunterladen (Seite 12)

Page 11

5 Removal of E46 Rear Seatback Side Bolster

These instructions were written using an E46 M3 with

electric rear window option. If your vehicle does not have

electric rear windows the bolster removal will be slightly

different. If you have any questions please call:

MDI/Schroth USA at: (800) 884-2358.

q With the ignition on, open the electric rear windows.

q Remove rear seat cushion by lifting up firmly on the

front edge of the cushion about 8” in from either

side.

q If the rear seat back folds down, do it now.

q Move the rear shoulder belt so that it wraps inboard

around the rear headrest. This will keep it out of the

way for removal of the rear seat back side bolster.

Remove the black

plastic circular cap

from the outboard

seat back bolster by

prying the top middle

with a small flat

head screwdriver.

(Only if you have

electric rear

windows.)

q With your thumbs under the front of the square black

plastic cover, push

up and towards the

back to disengage

this from the seat

back bolster. This is

to expose the male

mounting tab that

holds the top of the

seat back bolster to

the vehicle (coupe

only).

q Using long flat head

screwdriver, push

down on the top of

the mounting clip

attached to the back

of the side bolster.

this mounting clip

down. This will take

some force as this is

the only thing holding the top of

this bolster in place. As you

push this clip down, pull the top

of the bolster away from the

vehicle while being careful not

to break the male clip on the

bottom of the bolster (see

image at right). Once this is

disengaged the seat back

bolster can be removed. To do this you will need to

wiggle the bolster slightly while pulling up. (NOTE: If

you should break the male plastic bolster mounting tab at

the top you can pick one up at your local BMW dealer for

under $5.00. Part number 52 20 8 099 555)

6 Re installation of E46 Rear Seatback Side Bolster

q Holding the bolster at

an angle, top facing to

the front, insert the

outside lower corner

pin into the frame rail.

And rotate the unit

towards the inside so

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 21 22

Kommentare zu diesen Handbüchern

Keine Kommentare

BMW E36 Convertible Betriebsanleitung Seite 12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos BMW E36 Convertible