BMW E36 Convertible Betriebsanleitung Seite 9

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 22
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 8
The front outboard lap belt mounting points are located at the
front of the metal rail that holds the bottom of the factory
seatbelt.
Page 8
q Pop off the black plastic cap to expose the retaining
bolt.
q Using a T50 Torx head socket, back out the bolt.
Place the SCHROTH connector just under the bolt
head and reinstall the bolt.
q Before tightening the bolt, align the SCHROTH
connector so that the webbing is pulling in the same
direction that the belt will pass over your lap when
connected. Torque the bolt to 30 ft.lbs.
q If desired, trim the plastic cover around the
SCHROTH bracket and clip it back over the bolt. A
razor blade or wire cutters work well for this task.
3.2 Outside lap belt mounting points E39 Sedan
q Adjust the electric seat to the
forward and raised position
giving access to the seat belt
mounting bolt.
q Locate the mounting bolt on
the outer most rear section
of the base of each front
seat. The retaining bolt
(indicated in blue) faces
inward. Remove this bolt
using a T50 Torx head
socket.
q Feed the SCHROTH lap belt
connector down from the top
between the side of the seat
and the factory belt. (base of
the factory belt is indicated in
red)
q Replace the bolt placing the SCHROTH bolt-in
connector (pictured in green) immediately behind
the bolt head and the stock bracket (red) behind the
SCHROTH bracket. Torque the bolt to 30 ft.lbs.
3.3 Outside lap belt mounting points E46 Sedan
q Locate the front outboard lap belt anchor bolt on the
rear outside corners of each seat as pictured above.
Remove this bolt using a 16mm hex head socket.
q Using a razor blade or wire cutters, trim off the small
piece of plastic outlined by the white marks (with the
red “X”).
q
Remount the anchor bolt with the SCHROTH bracket
resting immediately under the bolt head and the
factory bracket in its original position. Position the
Seitenansicht 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 21 22

Kommentare zu diesen Handbüchern

Keine Kommentare