BMW HP4 Wartungshandbuch PDF herunterladen (Seite 135)

Wheel rims and tires

Check wheel rims

Make sure ground is level and

firm and park motorcycle.

Subject wheel rims to visual

inspection for defects.

Have damaged rims checked

and, if necessary, replaced

by a specialist service facil-

ity, preferably an authorized

BMW Motorrad retailer.

Checking tire tread depth

The handling of your mo-

torcycle can already change

for the worse before the legally

prescribed minimum tread depth

is reached.

Have tires replaced even be-

fore the minimum tread depth

is reached.

Make sure ground is level and

firm and park motorcycle.

Measure tire tread depth in

main tread grooves with wear

indicating marks.

Tread wear marks are

integrated into the main

grooves on every tire. If the tire

tread has worn down to the

level of the marks, the tire is

completely worn. The locations

of the marks are indicated on

the edge of the tire, e.g. by the

letters TI, TWI or by an arrow.

When the minimum tread depth

is reached:

Replace tires concerned.

Chain

Lubricate chain

Dirt, dust and insufficient

lubrication will considerably

shorten the service life of the

drive chain.

Clean and lubricate the drive

chain regularly.

Lubricate drive chain at lease

every 500 mls (800 km). After

driving though water or dust

and dirt perform the lubrication

at shorter intervals.

Switch off ignition and engage

Neutral.

Clean drive chain with suitable

cleaning agent, dry and apply

chain lubricant.

To extend and maximize

the chain's service life

BMW Motorrad recommends

using BMW Motorrad chain

lubricant or:

Lubricant

Chain spray

Wipe off excess lubricant.

Checking chain tension

Make sure ground is level and

firm and park motorcycle.

9

133

z

Maintenance

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 193 194

Kommentare zu diesen Handbüchern

Keine Kommentare