Remove screw 1, slightly pull
the muffler retaining strap apart
and pull it backwards off the
muffler.
Attach muffler holder and in-
stall screws 1 (M8x30) with the
specified torque.
Carbon holder (muffler)
on rear frame
21 lb/ft (28 Nm)
Slightly pull retaining strap 1
apart and pull it from the back
over the muffler.
Align retaining strap and muf-
fler. Make sure that the retain-
ing strap has contact with the
muffler holder on the outside.
Insert screw 2 in washer, re-
taining strap, muffler holder,
second washer and nut and
tighten to the specified torque.
Muffler clamp on holder
15 lb/ft (20 Nm)
Remove screws 1.
Remove passenger footrest.
8
117
z
Accessories
Kommentare zu diesen Handbüchern