Bmw 760Li Sedan 2010 Bedienungsanleitung PDF herunterladen (Seite 108)

Press the button

▷ If active: press twice.

▷ If interrupted: press once.

The displays go out. The stored desired speed

and distance are deleted.

Interrupting

When active, press the button.

If interrupting the system while stationary, de‐

press the brake at the same time.

The system is automatically interrupted if:

▷ The brakes are applied.

▷ Transmission position D is disengaged.

▷ DTC Dynamic Traction Control is activated

or DSC is deactivated.

▷ DSC is actively controlling stability.

▷ The safety belt and the driver's door are

opened when the vehicle is standing.

▷ The system has not detected objects for an

extended period, e.g., on a road with very lit‐

tle traffic without road edge line markings.

▷ The radar sensors are dirty.

Maintaining/storing the speed

Press the button.

When the system is switched on, the current

speed is maintained and stored as the desired

speed.

It is displayed in the speedometer and briefly

displayed in the instrument cluster, Displays in

the instrument cluster, refer to page 109.

Changing the speed

Adapting the desired speed

Adapt the desired speed to the road con‐

ditions and be ready to brake at all times; other‐

wise, there is the danger of an accident occur‐

ring.◀

Speed differences

Great speed differences with vehicles driving

ahead of you, e.g., when rapidly approaching a

truck or when another vehicle swerves into your

own lane, cannot be compensated for by the

system.◀

Press the rocker switch up or down repeatedly

until the desired speed is set.

If active, the displayed speed is stored and the

vehicle reaches the stored speed if the road is

clear.

▷ Each time the rocker switch is pressed to the

point of resistance, the desired speed in‐

creases or decreases by approx. 1 mph/

1 km/h.

▷ Each time the rocker switch is pressed past

the point of resistance, the desired speed

increases or decreases by a maximum of

5 mph/10 km/h. Max. adjustable speed:

110 mph/180 km/h.

Hold the rocker switch in position to repeat the

action.

The rocker switch can be pressed while inter‐

rupted to maintain and store the current speed.

Distance

Selecting a distance

Adjust the distance according to the traffic

and weather conditions; otherwise, there is the

danger of an accident occurring. Maintain the

prescribed safety distance.◀

Reduce distance

Press the button repeatedly until the

desired distance is set.

The selected distance, refer to page 109, is dis‐

played in the instrument cluster.

Seite 108

108

Online Edition for Part no. 01 41 2 602 638 - © 09 09 510 BMW AG

Driving comfort

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 279 280

Kommentare zu diesen Handbüchern

Keine Kommentare