BMW 3 1993 Bedienungsanleitung PDF herunterladen (Seite 17)

21 AIRBAG SUPPLY WIRE RESISTANCE TOO HIGH - PASSENGER SIDE

- Please check the wire resistance. If necessary replace the cable set.

22 AIRBAG SUPPLY WIRE - DRIVER SIDE WIRE DEFECT - Please check

the wire resistance. If necessary replace the cable set.

SRS 2 (1991-93)

CODE DESCRIPTION OF MALFUNCTION

1 FRONT SENSOR TRIGGERED - ONE TIME

2 FRONT SENSOR TRIGGERED - MULTIPLE TIMES

5 FRONT SENSOR TRIGGERED - PERMANENT

13 TWO FIRING CIRCUITS ARE SHORT CIRCUITED

19 FRONT SENSOR SUPPLY VOLTAGE - LEFT FAULT

20 FRONT SENSOR SUPPLY VOLTAGE - RIGHT FAULT

27 PRIMARY AIRBAG FIRING CIRCUIT IS SHORTED TO + BATTERY -

Check wiring for short.

33 PRIMARY AIRBAG FIRING CIRCUIT IS SHORTED GROUND - Check

wiring for shorts or breaks.

42 AIRBAG IGNITION CIRCUIT - DIVERS SIDE - Resistance too low

43 SEATBELT PRE-TENSIONING SYSTEM - PASSENGER AIRBAG -

Resistance in circuit II is too low.

44 PASSENGER AIRBAG - Resistance in circuit III (or spare resistor) is too

low.

45 AIRBAG IGNITION CIRCUIT - DIVERS SIDE - Resistance in supply wire

is too high

46 SEATBELT PRE-TENSIONING SYSTEM - PASSENGER AIRBAG -

Resistance in circuit II is too high.

47 PASSENGER AIRBAG - Resistance in circuit III (for spare resistance) is

too high.

49 SRS WARNING LAMP FAULTY

50 SRS CONTROL UNIT DEFECT - DEALER REPLACEMENT ONLY

-Delete fault stored in memory. Operate vehicle for 5 minutes. If the fault

re-occurs, the SRS Control Unit will need replacement.

52 CRASH ACCUMULATOR TRIGGERED - DEALER REPLACEMENT

ONLY

17 of 32 11/15/00 9:55 AM

bmwcodes http://www.baumtools.com/bmwcodes.htm

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Keine Kommentare

BMW 3 1993 Bedienungsanleitung Seite 17