BMW E46 Bedienungsanleitung PDF herunterladen (Seite 2)

12/EN

Park Distance Control (PDC)

BMW 3 Series saloon (E46/4), BMW 3 Series touring (E46/3)

Only for use in the BMW trading organisation.

Installation time approx. 4 hours, which can vary

according to the condition and fittings of the

vehicle.

Electrical knowledge is required.

General notes

The method of installation is illustrated on a left-

hand drive model. For right-hand drive models,

under certain circumstances installation must be

carried out in mirror image.

In the event that given PIN spaces are already

assigned, bridges, double crimpings or parallel

connections will have to be made.

Cable installation

To avoid the possibility of faults occurring, keep to

the prescribed installation paths in the vehicle!

Do not work under any circumstances with so-

called “Scotchlock quick connectors“ as these can

trigger faults in the on-board electrical system.

When installing cables in the vehicle, make sure

they do not get kinked or damaged as likewise

faults may occur which can only be localised by

extensive reworking later. Costs arising in these

circumstances will not be indemnified by BMW.

Required tools and auxiliary materials

MoDiC III or DIS (version 13 or higher)

Phillips screwdrivers

Flat-tip screwdrivers

1/2 inch extension

1/2 inch socket wrench insert SW 10 mm

13 mm, 16 mm, 17 mm

Special tool for removing socket contacts

Open-jawed wrench SW 10 mm

1/2 inch reversible ratchet

Contents

1. Necessary preparatory work on the vehicle

2. Power supply wiring harness /overview

3. Ultrasonic sensor wiring harness /overview

4. Installation of ultrasonic sensor

5. Install ultrasonic sensor wiring harness

6. Installation of PDC control unit

7. Install power supply wiring harness

8. Coding the PDC control unit

9. Wiring diagram

1. Necessary preparatory work on

the vehicle

- Print out error memory

- Disconnect battery

- Remove rear bumper

- Dismantle rear seat bench

- Remove sill strips at front and rear on the right-

hand side of the vehicle

- Remove lower B-pillar trim panel

- Dismantle glove box

- Dismantle footwell trim panel on driver‘s side

Only BMW 3 Series saloon (E46/4)

- Dismantle rear-seat back (only vehicles without

through-load system)

- Dismantle side bolster at rear right (only vehicles

with through-load system)

Only BMW 3 Series touring (E46/3)

- Dismantle rear-seat back

- Dismantle boot roller blind

- Dismantle boot and wheel arch trim panel on

1 2 3 4 5 6 7 ... 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

BMW E46 Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kfz-Elektronik BMW E46