BMW X6 M Bedienungshandbuch PDF herunterladen (Seite 40)

Giving and receiving assistance

38

5. Attach the second end of the cable to the

negative terminal of the battery or to the

engine or body ground of the vehicle to be

started.

Charging: 12 Volt battery

1. Start the engine on the assisting vehicle

and activate drive readiness, allowing the

assisting vehicle to run at idle for several

minutes at slightly increased speed.

2. Start the engine on your vehicle in the usual

way.

If the first starting attempt is not successful,

wait a few minutes before another attempt

in order to allow the discharged battery to

recharge.

3. Let the engines run for a few minutes.

4. Disconnect the jumper cables by reversing

the connection sequence.

Have the battery checked if necessary.

Never use spray fluids to start the

engine.<

Charging: High-voltage battery

1. Start the engine on the assisting vehicle

and activate drive readiness, allowing the

assisting vehicle to run at idle for several

minutes at slightly increased speed.

2. Switch on the ignition of your vehicle when

prompted by the corresponding message

on the Control Display. The charging

begins.

3. The charging is concluded when this is

prompted by a corresponding message on

the Control Display.

4. Start the combustion engine of your own

vehicle.

5. Disconnect the jumper cables by reversing

the connection sequence.

Have the hybrid system checked if necessary.

Never use spray fluids to start the

engine.<

Charging interrupted

The charging may be interrupted, for example if

the battery power of the assisting vehicle is

insufficient.

Disconnect the jumper cables in the reverse of

the sequence described above and contact

your BMW Sports Activity Vehicle Center.

Tow-starting and towing

Getting towed:

Have your BMW ActiveHybrid X6 trans-

ported only on a flat bed of a tow truck;

otherwise, the high-voltage system may be

damaged.<

In special circumstances, it is possible to have

the vehicle towed on the road for short dis-

tances, e.g. in order to remove the vehicle from

a dangerous area.

No tow-starting

The engine cannot be started by tow-starting.

Start the engine by jump starting it, refer to

page 37.

Have the cause of the starting difficulties elimi-

nated.

Towing the vehicle

Towing your BMW ActiveHybrid X6 with a tow

rope or tow bar is only possible in special cir-

cumstances for short distances, e.g. in order to

remove the vehicle from a dangerous area. Oth-

erwise, the hybrid system can be damaged.

Online Edition for Part no. 01 41 2 603 632 - © 09/09 BMW AGOnline Edition for Part no. 01 41 2 603 632 - © 09/09 BMW AG

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 53 54

Kommentare zu diesen Handbüchern

Keine Kommentare