BMW X6 M Bedienungshandbuch PDF herunterladen (Seite 16)

Driving

14

Drive readiness

With drive readiness activated, the vehicle is

ready to drive.

Switching on drive readiness corresponds to

starting the engine in conventional vehicles.

Drive readiness can take the following forms:

> Electric driving

The combustion engine is not switched on.

> Driving with combustion engine

The vehicle is driven by the combustion

engine.

Drive readiness in detail

Never leave the vehicle unattended with

drive readiness activated; such a vehicle

represents a potential safety hazard.<

Activating drive readiness

1. Close the driver's door.

2. Insert the remote control as far as possible

into the ignition lock. With comfort access

*

,

place the remote control into the vehicle,

refer to BMW X6 Owner's Manual.

3. Depress brake pedal.

To initialize the brake system, the

brake pedal travel is longer than usual

during activation of drive readiness. After

the brake pedal is released, the pedal travel

returns to normal.<

4. Press the Start/Stop button.

5. Drive readiness is active:

> Starting the combustion engine

> or electric drive readiness, silent start:

The tachometer pointer moves into the

READY position.

Electric drive readiness can be acti-

vated within an interval of approx. 2 to

60 seconds after radio readiness is

switched on, provided that the function

conditions for electric driving have been

met, refer to page 15.<

Electric drive readiness, silent start

The vehicle is ready to drive without starting the

combustion engine.

Silent start, the noiseless starting of the vehicle,

can be activated within an interval of approx. 2

to 60 seconds after radio readiness is switched

on, under the following conditions:

> driver's door closed

> conditions met to allow electric driving,

refer to page 15

During electric driving, please note that

pedestrians and other road users may fail

to notice the vehicle in the usual way due to the

lack of engine noise. For example, proceed with

particular caution when pulling into and out of a

parking space.<

Starting the combustion engine

When drive readiness is switched on under the

following circumstances, the combustion

engine is started:

> drive system not at operating temperature

> high temperature of hybrid system

> insufficient charge state of high-voltage

battery or fully charged high-voltage battery

If a Silent start is not possible:

Avoid frequent starting of the combustion

engine in quick succession or repeated starting

attempts in which the engine does not start.

Otherwise, the fuel is not burned or inade-

quately burned and there is a danger of over-

heating and damaging the catalytic converter.<

Online Edition for Part no. 01 41 2 603 632 - © 09/09 BMW AGOnline Edition for Part no. 01 41 2 603 632 - © 09/09 BMW AG

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 53 54

Kommentare zu diesen Handbüchern

Keine Kommentare