70
R 1200 CL
BMW Inspection I Procedures (600 Miles)
Checking / adjusting valve clear-
ance
BMW inspections/services I, II, III, IV
• Check valve clearances with two
feeler gauges simultaneously and
engine temperature below 95
O
F.
• Adjust clearance if necessary
Caution: Make sure gaskets are
seated correctly, the center gasket
may have a wear pattern, install in
same position as it was removed.
• Reinstall all components and torque
to specification.
Check Valve Clearances, Adjust if necessary
R 1200 CL Introduction
VVaallvvee CClleeaarraanncceess::
Intake 0.15 mm (0.006 in.)
Exhaust 0.30 mm (0.012 in.)
TTiigghhtteenniinngg ttoorrqquuee::
Adjuster lock nut, 8 Nm (6 ft. lb.)
Cylinder head cover, 8 Nm (6 ft. lb.)
Kommentare zu diesen Handbüchern