BMW R 1200 CL Wartungshandbuch PDF herunterladen (Seite 33)

31

R 1200 CL

Technical Features in Detail

The neatly arranged electrical system is

located under the fuel tank and is the

basis for operating the electrical compo-

nents. In addition to the distribution sys-

tem technology and high quality connec-

tors, the new wiring harness provides the

possibility of options such as the Anti

Theft System to simply plug into wiring

provisions.

The Motronic control module is located

above the central electrical control box.

Different electrical accessories can be con-

nected to the wiring harness via the prein-

stalled special accessory-terminal.

The electronic speedometer is supplied

with a processed speed signal from the

Integral ABS control module.The turn signal

indicator relay is also fed with the speed

signal, which ensures that the direction

indicator is reset after approx. 210 m and/or

11 seconds.

The light-emitting diode for the reserve fuel

is controlled via an electronic module,

which has a time delay of 17 seconds.

The alternator’s maximum output is 840

Watt, of which 300 watts is available at

engine idle speed.The compact battery has

a capacity of 19 Ah.

Cranking the engine is accomplished with

an 1.1-kW planetary gear starter. Cranking is

only possible when the gear box is in neu-

tral or in gear with the clutch lever pulled in.

Only then is there voltage on the coil of the

ignition relay via the clutch lever and gear

lever. Starting is only possible after the prop

stand has been folded in. This is a typical

safety feature of BMW. If a gear change is

made when the side prop is folded out, then

the Motronic relay is switched off.

Two easily accessible fuse boxes with new

mini fuses are arranged behind the left air

filter cover.

Electrical Components

Electrical components:

1 Blinker/Flasher module

2 Fuel level indicator

dampening module

3 High beam relay (yellow)

4 Starter relay

5 Low beam relay (yellow)

6 ABS warning relay

7 Motronic relay

8 Fuel pump relay

9 Horn relay

10 Load Shed Relay

11Terminal connection for

Ignition and light switch

Not pictured - located

under starter relay is

starting system diode

11

4

3

8

9

10

7

6

5

2

1

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 107 108

R 1200 CL 1
R 1200 CL Introduction 83

Kommentare zu diesen Handbüchern

Keine Kommentare