BMW 325i Bedienungshandbuch PDF herunterladen (Seite 159)

159n

Index Data Technology Repairs Car care Controls Overview

Changing a wheel

Take these precautionary mea-

sures if you have either a flat tire or

are changing a wheel.

Stop the vehicle as far as possible from

passing traffic. Park on a firm, flat

surface. Switch on the hazard warning

flashers. Turn the steering wheel to the

straight-ahead position, remove the key

and engage the steering lock. Shift into

1st gear or reverse (selector lever in

"Park" with automatic transmission)

and engage the parking brake.

All passengers should be outside the

vehicle and well away from your imme-

diate working area (behind a guardrail,

for instance).

If a warning triangle or portable hazard

warning lamp is available, set it up on

the roadside at an appropriate distance

from the rear of the vehicle. Comply with

all safety guidelines and regulations.

Change the wheel only on a level, firm

surface that is not slippery. Avoid jack-

ing the vehicle on a soft or slippery

support surface (snow, ice, loose gravel,

etc.), as it could slide sideways.

Position the jack on a firm support

surface.

Do not place wooden blocks or similar

objects under the jack, otherwise, the

jack might not be able to reach its full

support capacity because of the limited

height.

Do not lie under the vehicle or start the

engine when the vehicle is supported by

the jack. Failure to comply with this

creates a risk of fatal injury.<

Your BMW has either a spare tire or

space-saver tire for temporary use to

ensure your mobility.

To remove the spare wheel, lift out

the floor panel in the luggage

compartment completely (refer to

page 109.<

What you will need

In order to avoid rattling noises later,

note the position of the tools when you

remove them and return them to their

original position when you are through

using them.

> Jack (1)

Raise both the floor panel and spare

tire panel and loosen the red wing nut

(arrow).

When you have completed your work,

screw the jack all the way back

down. Fold the handle back and

insert it into its holder

> Wedge (2)

Located behind the jack. Loosen the

wing nut to remove it

> Wheel stud wrench (3)

463de036

Online Edition for Part No. 01 41 0 155 307 - © 09/00 BMW AG

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 202 203

Kommentare zu diesen Handbüchern

Keine Kommentare