Bmw 2013 3 Series Bedienungsanleitung PDF herunterladen (Seite 201)

21-watt bulb, PY21W

1. In the wheel house, loosen the two brackets

and remove the cover.

2. If necessary, pull the inside trim of the wheel

house slightly inward. Turn the bulb holder

counterclockwise and remove.

3. Press the bulb gently into the socket, turn

counterclockwise and remove.

4. Install the new bulb and bulb holder in re‐

verse order of removal.

5. Attach the cover to the wheel house.

Front fog lamps

Follow the general instructions on lamps and

bulbs, refer to page 196.

35-watt bulb, H8

Use the back side of the screwdriver from

the onboard vehicle tool kit to remove the

three wheel house panel screws, arrow 1.

Carefully raise the wheel house panel, ar‐

row 2.

2. Pull off the bulb connector, arrow 1.

Turn the bulb, arrow 2.

Left side of vehicle: turn clockwise.

Right side of vehicle: turn counterclockwise.

Remove the bulb.

3. Insert the new bulb, connect the connector

and screw on the wheel house panel.

Turn signal in exterior mirror

Follow the general instructions on lamps and

bulbs, refer to page 196.

The turn signals feature LED technology. Con‐

tact your service center in the event of a mal‐

function.

Seite 201

Replacing components Mobility

201

Online Edition for Part no. 01 40 2 903 880 - 07 12 490

1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 241 242

Keine Kommentare

Bmw 2013 3 Series Bedienungsanleitung Seite 201