Bmw 2013 3 Series Bedienungsanleitung PDF herunterladen (Seite 198)

Turn signal

21-watt bulb, PY21W

1. If necessary, pull the inside trim of the wheel

house slightly inward. Turn the bulb holder

counterclockwise and remove.

2. Press the bulb gently into the socket, turn

counterclockwise and remove.

3. Install the new bulb and bulb holder in re‐

verse order of removal.

4. Attach the cover to the wheel house.

Low beams

55-watt bulb, H7

1. Turn the cap counterclockwise and remove.

2. Tilt the bulb down and then up to loosen it

from the holder and remove.

3. Pull the connector off the bulb.

4. Attach the connector to the new bulb.

5. First insert the bulb at the top with the strap,

arrow 1, and then press down firmly, arrow 2.

Make sure that the bulb snaps into place.

6. Close the headlamp housing with the cap.

Make sure that the cap engages.

7. Attach the cover to the wheel house.

Seite 198

Mobility Replacing components

198

Online Edition for Part no. 01 40 2 903 880 - 07 12 490

1 2 ... 193 194 195 196 197 198 199 200 201 202 203 ... 241 242

Keine Kommentare

Bmw 2013 3 Series Bedienungsanleitung Seite 198