BMW NAVIGATOR IV - REV A Bedienungshandbuch PDF herunterladen (Seite 42)

34 Navigator III Owner’s Manual

APPENDIX

Removing Your Navigator III from the

Motorcycle Mount

1. Use the security screwdriver to loosen the screw on the top

of the cradle lock.

2. Lift the cradle lock up until it clicks.

3. Pull the BMW Motorrad Navigator III unit out of the mount.

4. Slide the power connector to the left to disconnect the

power cable.

Connecting to Your Computer

NOTE: Do not connect the USB cable to your computer until

you have loaded the USB drivers using the enclosed DVD-

ROM.

To update your software, load additional maps, or load Custom

POIs, connect your Navigator III to your computer using the USB

cable provided.

Step 1: Load the USB Drivers

Before connecting the USB cable to your computer, place the

enclosed DVD-ROM into your computer’s DVD-ROM drive.

If the DVD-ROM does not start automatically, click

Start and

then Run…. Type the letter of your DVD-ROM drive followed

by “setup” (example: “D:\setup”). Then press Enter. Follow the

on-screen instructions.

Step 2: Connect AC Power

Connect the enclosed AC power cable to the power connector

on the back of the Navigator III Connect the end to an available

electrical outlet.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Keine Kommentare

BMW NAVIGATOR IV - REV A Bedienungshandbuch Seite 42