BMW NAVIGATOR IV - REV A Bedienungshandbuch PDF herunterladen (Seite 43)

BMW Motorrad Navigator III Owner’s Manual 35

APPENDIX

Step 3: Connect the USB Cable

Use the USB cable provided to connect the Navigator III to your

computer. Also use the USB cable when updating the Navigator III

software or loading additional maps.

To connect your Navigator III to your computer:

1. Plug the small end of the USB cable into the connector

located on the back of your Navigator III

2. Connect the larger end of the USB cable to an available

USB port on your computer.

Go to http://www.garmin.com/registration/ to register your

Navigator III. By registering, you will receive notiﬁcation of

software and map updates.

Updating the Software and Map Data

1. Load the USB drivers using the enclosed DVD-ROM. See

the previous page.

2. Connect the AC cable to the power connector on the back

of the Navigator III. Turn on the Navigator III

3. Connect the USB cable to your Navigator III and your

computer.

4. Go to http://www.garmin.com/products/navigatorIII. Select

Updates and Downloads.

5. Click Download next to the unit software.

6. Read and agree to the terms. Click Download.

7. Select Run (or Open). Your software is updated.

You can also use WebUpdater to update your Navigator III

software. Go to http://www.garmin.com/products/webupdater/ to

learn about WebUpdater.

Check http://www.garmin.com/unlock/update.jsp to see if an

update for your map software is available.

To ﬁnd out the version of the maps that are loaded on your

Navigator III, open the Main menu. Touch

Settings > About

> Detail Maps. To load maps to your Navigator III, see the

MapSource Help ﬁle.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 49 50

Keine Kommentare

BMW NAVIGATOR IV - REV A Bedienungshandbuch Seite 43