Bmw X5 3.0si SAV 2007 Bedienungsanleitung PDF herunterladen (Seite 118)

Practical interior accessories

116

Cargo bay

Roll-up cover

Pull out the roll-up cover and hook it into the

brackets.

Do not place heavy or hard objects on the

roll-up cover. If you do so, they may

already pose a danger to vehicle occupants dur-

ing braking or evasive maneuvers.

Do not allow the roll-up cover to snap back, oth-

erwise it can be damaged.<

Removing

1. Unlock the case with the button, arrow 1.

2. Swing the case somewhat to the left,

arrow 2, and remove.

Installing

When installing, proceed in the opposite order

of removal.

1. Lay on the case on the left-hand side and

push it forward, arrow 1.

2. Swing the case toward the inside, refer to

arrow 2.

3. Push the case forward at the ends until it

engages in the two side brackets.

4. Check whether the case is properly locked

in place by pulling it with a sudden move-

ment.

Separation net*

Hooking in separation net

Pull the separation net out of the case by the

loop. Grasp the rod on both sides and insert it in

the brackets, arrow 1. This is best carried out

from the rear seat.

Letting down separation net

When you no longer require the separation net,

grasp the rod on both sides and remove it from

the brackets, arrow 2. Then slowly allow the

separation net to glide into the case.

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 271 272

Keine Kommentare

Bmw X5 3.0si SAV 2007 Bedienungsanleitung Seite 118