BMW MINI CONVERTIBLE Bedienungshandbuch PDF herunterladen (Seite 59)

57

OVERVIEWREPAIRS OPERATION CONTROLSDATAINDEX

PARKING LAMPS/LOW BEAMS

Switching on the parking lamps

Turn to the first position.

The front, rear and side vehicle lighting is

switched on.

Standing lamps on one side, refer to next

column.

Switching on the low beams

Turn to the second position.

With the low beams on and with the igni-

tion switched off, only the parking lamps

will remain on.

'Follow me home' lamps

If you activate the headlamp flasher after

having switched off the engine and the

lights, the low beams will stay lit for a pre-

set period of time.

You can have this function pro-

grammed.<

Switching on the standing lamps

For parking, you can activate lights on one

side of the vehicle. Observe local laws.

In ignition key position 0:

Move the lever to the adequate turn signal

indicator position.

The standing lamps discharge the

battery. Avoid using them for longer

periods of time; otherwise, you may not be

able to start the engine.<

'Lights on' warning

If the lights have not been switched off and

the ignition key is in position 0, an acoustic

signal sounds for a few seconds when you

open the driver's door to remind you that

the lights have not been switched off.

Daytime driving lamps*

If convenient, the light switch can be left in

position 0 or 1.

The low beams switch on automatically in

ignition key position 2 or higher.

The exterior lamps go out when the igni-

tion is switched off and the light switch is

set to position 0. In position 1, the parking

lamps are automatically switched on.

The dynamic headlamp range con-

trol for xenon lamps only operates

with the light switch in position

1 or 2.<

You can have the daytime driving

lamp function activated/deacti-

vated.<

Online Edition for Part-No. 01 41 0 158 427 - © 07/04 BMW AG

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 164 165

Kommentare zu diesen Handbüchern

Keine Kommentare