BMW MINI CONVERTIBLE Bedienungshandbuch PDF herunterladen (Seite 137)

135

OVERVIEWREPAIRS OPERATION CONTROLSDATAINDEX

JUMP-STARTING

>MINI COOPER S and MINI COOPER S

Convertible:

Open the cover of the auxiliary jump-

starting terminal, arrow 1

2. Connect one terminal clamp of the

plus/+ jumper cable to the positive bat-

tery terminal or to an auxiliary jump-

starting terminal of the support vehicle

3. Connect the other terminal clamp of the

plus/+ jumper cable to the positive bat-

tery terminal or to an auxiliary jump-

starting terminal of the vehicle to be

started

Engine or body ground in your MINI or MINI

Convertible: arrow 2.

4. Connect one terminal clamp of the

minus/– jumper cable to the negative

battery terminal or to an engine or body

ground of the support vehicle

5. Connect the second terminal clamp of

the minus/– jumper cable to the nega-

tive terminal of the battery or to the

engine or body ground of the vehicle to

be started.

Performing the jump-start

1. Start the engine of the support vehicle

and allow it to run at a fast idle speed for

several minutes

2. Start the engine of the other vehicle in

the usual manner.

If the first start attempt is not success-

ful, wait a few minutes before another

attempt in order to allow the discharged

battery to recharge

3. Allow the engines of both vehicles to run

for several minutes

On the MINI or MINI Convertible:

Before disconnecting the jumper

cables, switch on the lighting, the rear

window defroster and the highest

blower speed to prevent a voltage surge

from the regulator to the electrical sys

-

tems and components.<

4. Then disconnect the jumper cables in

the reverse order.

If necessary have the battery checked and

completely charged at a MINI Dealer.

Do not use spray starter fluids to start

the engine.<

Online Edition for Part-No. 01 41 0 158 427 - © 07/04 BMW AG

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 164 165

Kommentare zu diesen Handbüchern

Keine Kommentare