BMW M6 Convertible Technical Information PDF herunterladen (Seite 10)

Special Note – Maintenance Intervals

The maintenance requirements for your vehicle

are determined dynamically by the Condition

Based Service (CBS) system. The maintenance

items stated herein reflect the latest information

available at the time of the printing of this

Booklet, and are subject to change.

The completion of certain subsequent

maintenance items or services, as required by

the BMW New Vehicle Limited Warranty, will be

specified at intervals computed by the BMW

Condition Based Service system as follows:

䉯 Oil Service: Engine oil should be changed with

the engine at operating temperature.

All 2013 model year M3 vehicles are factory-filled

with Castrol EDGE Professional TWS 10W-60

Synthetic Engine Oil (BMW part number

83 12 2 219 730). Alternatively, Castrol TWS

Motorsport SAE 10W-60 Synthetic (BMW part

number 07 51 0 009 420) can be used. These

are the only approved engine oils at the time of

printing of this Booklet.

All 2013 model year M5 and M6 vehicles are

factory-filled with BMW High Performance

SAE 5W-30 Synthetic Oil (BMW part number

07 51 0 002 545). We recommend this oil for

regularly scheduled engine oil changes.

BMW recommends that you check your engine

oil level whenever you add fuel to your vehicle.

For M3 only: if you need to add oil between oil

changes and Castrol EDGE Professional TWS

10W-60 Synthetic Engine Oil (BMW part number

83 12 2 219 730) or Castrol TWS Motorsport

SAE 10W-60 Synthetic (BMW part number

07 51 0 009 420) are unavailable, for the purpose

of topping up the engine oil level only, use a

synthetic engine oil with an American Petroleum

Institute (API) “SM” rating or higher:

䉯 Viscosity – preferred SAE 10W-60

䉯 Alternative – SAE 10W-40, SAE 5W-50 or

SAE 10W-50

For M5 and M6: if you need to add oil between

oil changes and BMW High Performance

Synthetic Oil is unavailable, for the purpose of

topping up the engine oil level only, use one of

the following approved synthetic oils. For

information on checking your engine oil level,

refer to your vehicle’s Owner’s Manual. The

synthetic oils listed below meet BMW’s Long-life

rating LL-01:

䉯 Castrol Syntec European Formula SAE 0W-30

䉯 Mobil 1 SAE 0W-40

䉯 Pennzoil Platinum European Formula Ultra

SAE 5W-30

䉯 Valvoline SynPower SAE 5W-30

The choice of the right SAE grade is based on

the climatic conditions in the region in which you

normally drive your BMW. To best determine

which SAE grade is best suited for your vehicle,

contact an authorized BMW center. If you are

unable to obtain BMW High Performance

Synthetic Oil or an approved synthetic oil from

the list above, for the purpose of topping up the

engine oil level only, use only a synthetic oil with

an API rating of SM or higher.

The following maintenance services must be

performed at the mileage/time stated (time

intervals begin from the vehicle’s production

date):

䉯 Brake Fluid Service: Change brake fluid every

two years, or when specified by CBS.

䉯 Oxygen Sensor Service: The oxygen sensor

deteriorates strictly on a mileage basis and

must therefore be replaced every

120,000 miles to maximize vehicle fuel

economy and minimize exhaust pollution.

䉯 Spark Plug Service (connected to specific

Engine Oil Service).

Replace at the following intervals:

– M3: At every 3rd Engine Oil Service

(approximately 37,000 miles)

– M5 and M6: At every 4th Engine Oil Service

(approximately 60,000 miles)

䉯 The engine coolant has a long-term rating and

does not need to be changed except for

system repairs.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 45 46

Kommentare zu diesen Handbüchern

Keine Kommentare

BMW M6 Convertible Technical Information Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos BMW M6 Convertible