BMW 760i Bedienungshandbuch PDF herunterladen (Seite 96)

Technology for comfort, convenience and safety

94

Switching off DSC

Select "Settings". Select "DSC" and con-

firm your selection. DSC is deactivated.

The indicator lamp in the Info Display

remains on continuously.

Deactivating DSC automatically deacti-

vates DTC as well. The systems for

enhancing stability and traction are deacti-

vated, and there is no active braking inter-

vention or torque control.

A status report appears in the Check Con-

trol. Please take note of the additional infor-

mation on the Control Display.

To maintain optimized stability, drive

with the system on whenever possi-

ble.<

Reactivating DSC

Select "Settings". Select "DSC" and con-

firm your selection. DSC is now activated.

The indicator lamp in the Info Display goes

out.

The laws of physics cannot be

repealed, even with DSC. An appro-

priate driving style always remains the

responsibility of the driver. Avoid using the

additional safety margin provided by the

system as an excuse for taking unneces-

sary risks.

When DTC is active, DSC provides only

limited system response up to a speed of

approximately 45 mph/70 km/h. Interven-

tion for stability enhancement is reduced.

Do not make any modifications to the DSC

system. Never allow anyone other than

authorized professional technicians to

carry out service or repairs on the DSC sys-

tem.<

DBC Dynamic Brake Control

When you apply the brakes rapidly, this

system automatically produces the maxi-

mum braking force boost and thus helps to

achieve the shortest possible braking dis-

tance during panic stops. This system

exploits all of the benefits provided by ABS.

Do not reduce the pressure on the brake

pedal for the duration of the brake applica-

tion. When the brake pedal is released, the

DBC is deactivated.

Malfunction in vehicle stability

control systems

The brake system warning lamp

lights up in red, appearing together

with the indicator lamps for ABS

and DSC. A status report appears in

the Check Control. Please take note

of the additional information on the

Control Display. Driving stability

control and ABS have failed. Con-

ventional braking efficiency remains avail-

able without limitations.

While you may continue, you should

remember to proceed cautiously and drive

defensively while avoiding full brake appli-

cations. Have the system checked as soon

as possible.

Display of the previously described

malfunction on Canadian models.

The DSC warning lamp lights up.

DSC and DTC have failed. Their sta-

bilizing interventions are no longer

available. The vehicle will remain com-

pletely operational, however, without DSC.

Have the system checked as soon as pos-

sible.

The brake system warning lamp

lights up yellow and a message

appears in the Check Control.

Please take note of the additional informa-

tion on the Control Display. DBC has failed.

Online Edition for Part-No. 01 41 0 159 154 - © 09/04 BMW AG

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 238 239

Kommentare zu diesen Handbüchern

Keine Kommentare