BMW 135i Bedienungshandbuch PDF herunterladen (Seite 89)

Reference At a glanceControlsDriving tipsMobility

87

Heating and ventilation, air conditioner*

1 Air distribution

2 Recirculated-air mode

3 Air volume

4 Cooling function

*

If the vehicle is not equipped with a cooling

function, the rear window defroster is

located here.

5 Temperature

6 Rear window defroster

If the vehicle is not equipped with a cooling

function, this control is located at position 4.

Air distribution

Direct the flow of air to the win-

dows , to the upper body area

or to the footwell . Intermedi-

ate settings are possible. In the

center position between and , the air is

also deflected at toward the windows.

Recirculated-air mode

If the air outside the car has an

unpleasant odor or contains pollut-

ants, shut off the supply to the

interior of the car temporarily. The

system then recirculates the air currently within

the vehicle.

You can also activate/deactivate the recircu-

lated-air mode by means of a button

*

on the

steering wheel, refer to page 11.

If condensation starts to form on the

inside window surfaces during operation

in the recirculated-air mode, you should switch

it off while also increasing the air volume as

required.

The recirculated-air mode should not be used

continuously for lengthy periods; otherwise, the

quality of the air inside the car will gradually

deteriorate.<

Air volume

Turn to adjust the air volume. The

higher the volume, the more effec-

tive the heating or cooling will be.

The air volume may be reduced or

the blower may be switched off entirely to save

on battery power.

Switching the system on/off

Set any desired air volume to switch on the air

conditioner.

Turn the air volume rotary switch to 0. The

blower and air conditioner are completely

switched off and the air supply is cut off.

The outside air supply is blocked when

the air conditioner is switched off. If the air

quality deteriorates or the window fogs over,

switch the system back on and increase the air

volume.<

Switching the cooling function* on/off

The cooling function cools and

dehumidifies the incoming air

before reheating it according to the

temperature setting. This function

is only available while the engine is running.

Online Edition for Part no. 01 41 2 604 079 - © 02/10 BMW AG

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 175 176

Kommentare zu diesen Handbüchern

Keine Kommentare