BMW F800 R Wartungshandbuch PDF herunterladen (Seite 91)

Check the tyre tread

depth

Your motorcycle's handling

and grip can be impaired

even before the tyres wear to

the minimum tyre tread depth

permitted by law.

Have the tyres changed in good

time before they wear to the

minimum permissible tread

depth.

Make sure the ground is level

and firm and place the motor-

cycle on its stand.

Measure the tyre tread depth

in the main tread grooves with

wear marks.

Tyres have wear indicators

integrated into the main

tread grooves. The tyre is worn

out when the tyre tread has worn

down to the level of the marks.

The locations of the marks are

indicated on the edge of the tyre,

e.g. by the letters TI, TWI or by

an arrow.

If the tyre tread is worn to min-

imum:

Replace tyre or tyres, as applic-

able.

Chain

Lubricating chain

Dirt, dust and inadequate

lubrication will result in ac-

celerated wear and significantly

shorten the drive chain's useful

life.

Clean and lubricate the drive

chain at regular intervals.

Lubricate the drive chain every

1000 km at the latest. Lubric-

ate the chain more frequently if

the motorcycle is ridden in wet,

dusty or dirty conditions.

Switch the ignition off and se-

lect neutral.

Clean the drive chain with a

suitable cleaning product, dry it

and apply chain lubricant.

Wipe off excess lubricant.

Checking chain sag

Make sure the ground is level

and firm and place the motor-

cycle on its stand.

Turn the rear wheel until it

reaches the position with the

lowest amount of chain sag.

Use a screwdriver to push the

chain up and down and meas-

ure difference a.

8

89

z

Maintenance

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 146 147

Kommentare zu diesen Handbüchern

Keine Kommentare