BMW Z4 Technical Information PDF herunterladen (Seite 10)

Inspection I

Only those items of inspection work which apply to your vehicle will be performed. This list is subject

to amendment.

Undercarriage

Z4 Roadster

3.0i, 3.0si

Z4 Coupe 3.0si

Change oil and oil filter while engine is at normal operating temperature. We

recommend BMW 5W-30 High Performance Synthetic Oil, p/n 07 51 0 017 866.

•

Check transmission for leaks. •

Check rear axle for leaks. •

Half-shafts: Check for leaks at flexible boots. •

Visually check fuel tank, lines and connections for leaks. •

Check condition, position, and mounting of exhaust system. Examine for leaks. •

Check steering for absence of play, condition of suspension track rods, front axle

joints, steering linkage and joint disc.

•

Check overall thickness of front and rear disc brake pads using special tool. If

replacement is necessary: Examine brake disc surfaces. Clean brake pad contact

points in calipers. Grease wheel centering hubs. Check thickness of parking brake

linings only when replacing rear brake pads. Check brake system connections and

lines for leaks, damage and incorrect positioning.

•

Check parking brake actuation. Adjust if necessary. Burnish parking brake. •

Check all tire pressures. Correct if necessary. Check condition of tires (outer surface

[left/right]), tread wear and pattern; in case of uneven tread wear, readjust wheel

alignment if requested (invoice separately).

•

Inspect entire body according to terms of rust perforation limited warranty. (Must be

performed at least every two years).

•

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 53 54

Keine Kommentare

BMW Z4 Technical Information Seite 10