BMW Z4 sDrive35i Technical Information Seite 11

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 45
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 10
Quality Certification I
For a detailed list of items inspected, refer to the
Quality Certification I form provided to the Owner
at time of delivery. A copy of the form is on file at
the selling BMW center.
Unscheduled Maintenance
Only use fuels advertised to have adequate
detergency and low alcohol content. Use of fuels
with insufficient detergent and/or excess alcohol
can cause driveability problems that necessitate
cleaning intake valves and fuel injection valves,
and, when applicable, adjusting the engine idle.
We suggest having this work performed by your
authorized BMW center, perhaps while regular
maintenance is performed. Your BMW center can
also recommend a gasoline additive that will
provide sufficient detergency. While this
recommended unscheduled maintenance is not
required in order to maintain the emission
warranty, cleaning of intake valves or, when
applicable, fuel injection valves, or adjustment of
engine idle, necessitated by use of inappropriate
fuel, it is not covered by warranty because no
defect in material or workmanship or component
failure is involved.
Maintenance Summary
The Condition Based Service (CBS) system will
determine the requirement for performance of
the maintenance services described on this and
the following page. These services may be
required either individually or in conjunction with
other maintenance services.
Standard operations
Maintenance work:
Verify Check Control messages.
Check indicator and warning lights.
Reset CBS display.
Inspect tires, adjust tire pressures and reset
Tire Pressure Monitor.
Engine oil
Maintenance work:
Change the engine oil and oil filter. We
recommend BMW High Performance 5W-30
Synthetic Oil P/N 07 51 0 017 866.
After every 2nd engine oil change: Intake air
cleaner: replace air filter element (reduce
replacement interval in dusty operating
conditions).
Microfilter (not shown in CBS)
Maintenance work:
Replace ventilation microfilter every 2 years
based on the vehicle production date, or in
connection with scheduled brake fluid change.
Front brake
Maintenance work:
Replace brake pads, clean brake pad contact
points in calipers.
Brake discs: Check surface and thickness; if
necessary, replace at extra charge.*
Rear brake
Maintenance work:
Replace brake pads, clean brake pad contact
points in calipers.
Brake discs: Check surface and thickness; if
necessary, replace at extra charge.*
Parking brake: Check condition, brake lining
thickness and function; if necessary, replace at
extra charge.*
*Unless covered by Maintenance Program.
7
Seitenansicht 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 44 45

Kommentare zu diesen Handbüchern

Keine Kommentare