BMW Z3 roadster 3.0i Bedienungshandbuch PDF herunterladen (Seite 109)

109n

Index Data Technology Repairs Maintenance Controls Overview

Hardtop* – roadster

Using the wrench from the onboard tool

kit (fastened to the jack with a Velcro®

strip), turn the screw (arrow) two to

three turns into the windshield frame on

the right and left sides.

367de386

Turn the right and left locking levers of

the rear hardtop mounting fasteners in

the direction of the arrow to the stop.

The rear mounting fasteners are

locked correctly when the locking

levers engage audibly and point to the

rear of the vehicle.<

Finally, tighten the screws in the wind-

shield frame (refer to the left column)

and secure the wrench in the onboard

tool kit.

After you have driven approx.

30 to 60 miles (50 to 100 km),

check the front hardtop fasteners to be

sure that they are seated securely.<

367de387

Removal

Reverse the above procedure for

removal of the hardtop.

The two screws of the front

hardtop fasteners remain perma-

nently in the windshield frame of your

vehicle to prevent their loss.<

Following the initial delivery of the

vehicle, or after the hardtop has been in

use for an extended period, closing the

convertible top requires increased

effort. You may find this operation

easier with the assistance of a second

person. Following that, the convertible

top should remain closed for at least

12 hours.

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 186 187

Keine Kommentare

BMW Z3 roadster 3.0i Bedienungshandbuch Seite 109