Bmw X6 xDrive50i 2009 Bedienungsanleitung PDF herunterladen (Seite 278)

Replacing components

276

far as possible from passing traffic and on solid

ground. Switch on the hazard warning flashers.

Set the parking brake and engage transmission

position P.

Have all vehicle occupants get out of the vehicle

and ensure that they remain outside the imme-

diate area in a safe place, such as behind a

guardrail.

If a warning triangle

* or portable hazard warning

lamp

* is required, set it up on the roadside at an

appropriate distance from the rear of the vehi-

cle. Comply with all safety guidelines and regu-

lations.

Change the wheel only on a level, firm surface

which is not slippery. The vehicle or the jack

could slip to the side if you attempt to raise the

vehicle on a soft or slippery surface such as

snow, ice, tiles, etc.

Position the jack on a firm support surface.

Do not use a wooden block or similar object as a

support base for the jack, as this would prevent

it from extending to its full support height and

reduce its load-carrying capacity.

To avoid serious or fatal injury: never lie under

the vehicle, and never start the engine while it is

supported by the jack.<

What you will need

To avoid rattling noises later on, note the posi-

tions of the tools before removing them, then

return them to their initial positions after com-

pleting work.

The tools are located in the mount under the

floor panel flap.

1 Vehicle jack

2 Vehicle jack crank*

3 Lug wrench*

Removing compact wheel

The compact wheel is located in the cargo bay

under the floor panel.

1. Remove the tool mount.

2. Unscrew the wing nut 1.

3. Remove the washer 2 laterally.

4. Remove the compact wheel.

Preparing wheel change

1. Observe the safety precautions above.

2. Loosen the lug bolts a half turn.

Jacking up vehicle

1. Position the vehicle jack at the jacking point

closest to the wheel so that the entire sur-

face of the jack base rests on the ground

perpendicularly beneath the jacking point.

The vehicle jack is designed for

changing wheels only. Do not attempt

to raise another vehicle model with it or to

raise any load of any kind. To do so could

cause accidents and personal injury.<

1 2 ... 273 274 275 276 277 278 279 280 281 282 283 ... 316 317

Kommentare zu diesen Handbüchern

Keine Kommentare

Bmw X6 xDrive50i 2009 Bedienungsanleitung Seite 278

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Bmw X6 xDrive50i 2009