Bmw X6 xDrive50i 2009 Bedienungsanleitung PDF herunterladen (Seite 53)

Controls

51

Reference At a glanceDriving tipsCommunications NavigationEntertainmentMobility

3. Press the button:

The LED in the button lights up.

4. Press the desired memory button 1 or 2:

The LED goes out.

The positions of the driver's seat, the exte-

rior rearview mirrors, and steering wheel are

stored for the remote control currently in

use.

Calling up automatically

You can choose when the stored positions of

the driver's seat, exterior rearview mirrors, and

steering wheel are activated.

> Calling up when unlocking vehicle

> Calling up when opening driver's door

When using this feature, always make

sure that the footwell behind the driver's

seat is empty and unobstructed. Failure to do

so could cause injury to persons or damage to

objects behind the seat as a result of a rearward

movement of the seat.<

The system cancels the adjustment procedure

when you briefly press one of the seat adjust-

ment switches or one of the memory buttons.

Selecting calling up automatically

iDrive, for operating principle refer to page 16.

1. Open the start menu.

2. Press the controller to open the menu.

3. Select "Settings" and press the controller.

4. Select "Vehicle / Tires" and press the con-

troller.

5. Change to upper field if necessary. Turn the

controller until "Door locks" is selected and

press the controller.

6. Select "Central locking" and press the con-

troller.

7. Select "Last seat pos." and press the con-

troller.

8. Select "After unlocking" or "After door

opened".

9. Press the controller.

Deactivating calling up automatically

Select "Deactivated" and press the controller.

Calling up manually

Do not call up a position from the memory

while the vehicle is moving. There is a risk

of accident from unexpected movement of the

seat or steering wheel.<

Comfort mode

1. Open the driver's door after unlocking or

switch on radio readiness.

2. Briefly press the desired memory button 1

or 2.

The system cancels the adjustment procedure

when you briefly press one of the seat adjust-

ment switches or one of the memory buttons.

Safety feature

1. Close the driver's door and switch the igni-

tion on or off.

2. Press the desired memory button 1 or 2

and maintain pressure until the adjustment

process has been completed.

If the button was pressed inadvertently:

press the button again; the LED goes out.

Online Edition for Part no. 01 41 2 600 809 - © 09/08 BMW AG

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 316 317

Kommentare zu diesen Handbüchern

Keine Kommentare