Bmw X5 3.0i SAV 2006 Bedienungsanleitung PDF herunterladen (Seite 170)

170n

Changing a wheel

5. Position the jack at the jacking point

closest to the flat tire so that the jack

base is vertically below the jacking

point and the entire surface of the

head of the jack will move into the

square recess of the jacking point,

refer to the illustration detail, when

the jack is cranked.

6. Jack the vehicle up until the wheel

you are changing is raised from the

ground.

7. Unscrew the lug bolts and remove

the wheel.

8. Remove accumulations of mud or dirt

from the mounting surfaces of the

wheel and hub. Clean the lug bolts.

9. Move the spare wheel into position.

Secure the wheel by turning at least

two lug bolts into opposite bolt

holes.

530de236

10. Screw in the remaining lug bolts.

Tighten all the bolts securely in a

diagonal pattern.

11. Lower the jack and remove it from

beneath the vehicle.

12. Tighten the lug bolts in a diagonal

pattern.

13. Check and correct the tire inflation

pressure at the earliest opportunity.

After mounting the spare wheel or

correcting the inflation pressure,

reinitialize the Flat Tire Monitor,

refer to page 99.

Protect valve stems and valves from dirt

using screw-on valve stem caps. Dirt in

the valve stems frequently leads to slow

leaks.

The vehicle jack is designed for

changing wheels only. Do not

attempt to raise another vehicle model

with it or to raise any load of any kind.

To do so could cause accidents and

personal injury.

To ensure safety, always have the lug

bolts checked with a calibrated torque

wrench as soon as possible to ensure

that they are tightened to the specified

torque. The tightening torque is

101 lb ft/140 Nm.<

Store the wheel and the tools in the

order opposite that for removal.

Before removing the support rod,

be sure that the tailgate is held

down firmly. If you fail to do so, it could

spring upward abruptly and cause per-

sonal injury and vehicle damage.

After you remove the rod, close the tail-

gate carefully. Continue to hold it firmly

until it is completely closed.<

If light-alloy wheels other than Genuine

BMW light-alloy wheels have been

mounted, it may be necessary to use

different lug bolts for those wheels.

Replace the defective tire as soon as

possible and have the new wheel/tire

balanced.

Driving with compact wheel

Drive reservedly and do not exceed a

maximum speed of 50 mph/80 km/h.

Altered handling characteristics, such

as reduced track stability during brak-

ing, longer braking distances and

altered self-steering properties at the

driving limit can occur. These proper-

ties are more apparent in conjunction

with winter tires.

Online Edition for Part No. 01 41 0 159 867 - © 07/05 BMW AG

1 2 ... 165 166 167 168 169 170 171 172 173 174 175 ... 201 202

Kommentare zu diesen Handbüchern

Keine Kommentare