Bmw M6 Coupe 2006 Bedienungsanleitung PDF herunterladen (Seite 74)

Technology for comfort, convenience and safety

72

The laws of physics cannot be repealed,

even with DSC. An appropriate driving

style always remains the responsibility of the

driver. Do not reduce the additional safety mar-

gin of the system by taking risks.<

DSC indicator lamp

The indicator lamp goes out shortly

after the engine is started.

The indicator lamp flashes: DSC is con-

trolling the drive forces and brake forces.

The indicator lamp stays lit: DSC is deactivated.

M Dynamic Mode MDM

The M Dynamic Mode is a mode of the DSC

Dynamic Stability Control. It enables driving

with greater longitudinal and lateral accelera-

tion on dry road surfaces, however with limited

vehicle stability. The system does not provide

stabilizing intervention by reducing the engine

output and braking at the wheels until the abso-

lute driving limit is reached. Steering correc-

tions by the driver may also be required in this

driving state.

The M Dynamic Mode is deactivated each time

the engine is started.

With the M Dynamic Mode activated, sta-

bilizing interventions are only carried out

to a reduced degree.<

To maintain vehicle stability, drive with

DSC activated and the M Dynamic Mode

deactivated whenever possible.<

MDM indicator lamp

The indicator lamp goes out shortly

after the engine is started. The indica-

tor lamp stays lit: M Dynamic Mode is

activated.

The indicator lamp lights up continuously and

the DSC indicator lamp flashes: the M Dynamic

Mode is active and controls the drive and brak-

ing forces.

Activating MDM

You activate the M Dynamic Mode with the

button on the steering wheel, refer to MDrive on

page 46.

With the ignition switched on you can change

the settings of MDrive on the Control Display.

iDrive, for explanation of principle, refer to

page 16.

1. Open the start menu.

2. Press the controller to open the menu.

3. Select "Vehicle settings" and press the

controller.

4. Select "MDrive" and press the controller.

5. Select "DSC" and press the controller.

6. Select "M Dynamic Mode" and press the

controller.

Deactivating MDM again

Press the button on the steering wheel

again; the MDM indicator lamp goes out.

Switching off DSC

Press the DSC button; the DSC indicator lamp

lights up continuously. DSC and MDM are

deactivated.

A message appears on the Control Display.

Please note any supplementary information

that appears there.

When rocking free and starting off from deep

snow or on loose road surfaces, it may be prac-

tical to briefly deactivate DSC.

Online Edition for Part No. 01 41 0 012 118 - © 02/06 BMW AG

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 226 227

Kommentare zu diesen Handbüchern

Keine Kommentare