Bmw M6 Coupe 2006 Bedienungsanleitung PDF herunterladen (Seite 190)

Replacing components

188

To avoid serious or fatal injury: never lie under

the vehicle, and never start the engine while it is

supported by the jack.<

What you will need

To avoid rattling noises later on, note the posi-

tions of the tools before removing them, then

return them to their initial positions after com-

pleting work.

1 Chock

2 Vehicle jack

3 Lug wrench

The tools are located in the hollow of the spare

wheel

Spare wheel*

1. Pull back lock 1, fold open clamp lock 2

completely and loosen the belt 3.

2. Remove the cover 4.

3. Take the tool mount out of the spare wheel.

4. Remove the spare wheel.

Preparing wheel change

1. Observe the safety precautions above.

2. Prevent the vehicle from rolling:

Place the chock behind the front wheel on

the other side of the vehicle, or on inclines,

in front of this wheel. On a steep grade, take

other steps to prevent the vehicle from roll-

ing.

3. Loosen the lug bolts a half turn.

Jacking up vehicle

The jacking points for the car jack are located in

the positions shown.

1. Position the vehicle jack at the jacking point

closest to the wheel so that the entire sur-

face of the jack base rests on the ground

perpendicularly beneath the jacking point.

The vehicle jack is designed for

changing wheels only. Do not attempt

to raise another vehicle model with it or to

raise any load of any kind. To do so could

cause accidents and personal injury.<

2. Guide the jack head into the rectangular

recess of the jacking point when cranking

up, refer to illustration detail.

3. Jack the vehicle up until the wheel you are

changing is raised from the ground.

1 2 ... 185 186 187 188 189 190 191 192 193 194 195 ... 226 227

Kommentare zu diesen Handbüchern

Keine Kommentare

Bmw M6 Coupe 2006 Bedienungsanleitung Seite 190

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Bmw M6 Coupe 2006