Bmw 650i Convertible 2007 Bedienungsanleitung PDF herunterladen (Seite 216)

Replacing components

214

4. Turn the bulb holder to the left and remove,

refer to arrow.

5. Remove and replace the bulb.

Side marker lamps

5-watt bulb, WY5WST

The bulb can be replaced via a cover at the front

of the wheel well, refer to the description for

turn signal lamp 2.

1. The bulb holder of the side marker lamp is

located toward the outside of the vehicle

next to the bulb holder of turn signal lamp 2.

2. Turn the bulb holder to the left and remove.

3. Remove and replace the bulb.

Side turn signals

5-watt bulb, WY5W

1. Press against the front edge of the lamp

with the tip of your finger, then push it to the

rear, release the snap connection at the

front and take it off the trim strip.

2. Turn the bulb holder to the left by 905 and

remove.

3. Remove and replace the bulb.

Tail lamps

The roadside parking, rear and brake

lamps are LEDs. The backup lamps are

equipped with long-life bulbs. Please contact a

BMW center in case of a malfunction.<

1 Turn signals

2 Roadside parking, tail and brake lamp

3 Backup lamp

4 Reflector

Rear turn signals

21-watt bulb, PY21W

The illustrations shows the left section of the

luggage compartment.

1. Remove the cover.

2. Unclip the bulb holder and remove.

3. Apply gentle pressure to the bulb while

turning it to the left for removal and replace-

ment.

1 2 ... 211 212 213 214 215 216 217 218 219 220 221 ... 253 254

Keine Kommentare

Bmw 650i Convertible 2007 Bedienungsanleitung Seite 216